WWIIReenacting.co.uk Forums
http://www.wwiireenacting.co.uk/forum/

Jeep help wanted
http://www.wwiireenacting.co.uk/forum/viewtopic.php?f=162&t=91052
Page 1 of 1

Author:  fallingplate [ Sat Jan 02, 2016 13:23 pm ]
Post subject:  Jeep help wanted

I am in the process of converting a bog standard ford GPW to British airborne specifications.

Most of the work is done and has been fairly straight forward.

However, I have hit my first real problem.

On trying to remove the front bumper I have found the bolts have welds on them to stop them coming undone. I do not have the tools to deal with this type of problem

Can any one here help, do you have experience of this problem, have the tools to do it and/or have a garage/workshop?

I am more than willing to pay for the help/service.

Ideally you would be in Jeep driving distance from Milton Keynes.

Cheers in advance,

Andy

Author:  earlymb [ Sun Jan 03, 2016 12:13 pm ]
Post subject:  Re: Jeep help wanted

Cut them off with an angle grinder? Those are cheap and come in handy now & then. Or a Dremel.

Author:  pikey [ Sun Jan 03, 2016 17:24 pm ]
Post subject:  Re: Jeep help wanted

Andy, have you seen this book? Available on amazon. Jon Piper has a copy if your still in contact with him :)
http://www.amazon.co.uk/BRITISH-AIRBORN ... B009RHBXIA

Author:  fallingplate [ Sun Jan 03, 2016 18:37 pm ]
Post subject:  Re: Jeep help wanted

pikey wrote:
Andy, have you seen this book? Available on amazon. Jon Piper has a copy if your still in contact with him :)
http://www.amazon.co.uk/BRITISH-AIRBORN ... B009RHBXIA


I've got it Nic.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/