WWIIReenacting.co.uk Forums

Maxim Fuzee Spring
Page 1 of 1

Author:  REME 245 [ Thu Apr 30, 2015 12:33 pm ]
Post subject:  Maxim Fuzee Spring

Looking for a Russian Maxim Fuzee Spring in the unlikely event anyone has one.

Author:  MartinS [ Sat May 02, 2015 19:19 pm ]
Post subject:  Re: Maxim Fuzee Spring

Ehm, bits like this don't seem to come easy. I've had a hard time finding a spare feed block for my Maxim after the feed arm shattered (Whoops). Ended up having to re-machine one myself.

Author:  REME 245 [ Mon May 04, 2015 16:56 pm ]
Post subject:  Re: Maxim Fuzee Spring

Need 2 or 3 to complete my tool kits. Probably plenty in Finland when they released their Maxims and probably large numbers of Maxims being scrapped in Russia now.

Author:  MartinS [ Tue May 05, 2015 8:56 am ]
Post subject:  Re: Maxim Fuzee Spring

I'd love if you could share an inventory list of these tool kits, I've found very little reliable information in english. I have been searching in Finland for a spare feed block for three months, with none apparently surfacing, which is why I opted to remake the part that shattered. Firing pins and springs seem to be common enough to find, so I've got a few spares of those.

No spare bolts or mainsprings or feed blocks however. I would like to have at least one of each as spares (though, not deactivated, as I need them for shooting).

Author:  REME 245 [ Thu May 07, 2015 14:38 pm ]
Post subject:  Re: Maxim Fuzee Spring

Feed Blocks and Locks come up for sale in the states but very expensive. I have also exchanged some late pattern steel feed blocks with collectors in the states for allumimum ones including one not converted for metal belts which is very rare.

If you send me a private e-mail address I will send you the pictures I have.

I have 3 of the 4 patterns of spare parts boxes which are housed in converted ammunition boxes.
Also the later canvas bags.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group