WWIIReenacting.co.uk Forums
http://www.wwiireenacting.co.uk/forum/

SVT40 Stripping
http://www.wwiireenacting.co.uk/forum/viewtopic.php?f=126&t=32843
Page 1 of 1

Author:  mark_palmer17 [ Sat Jul 21, 2007 21:51 pm ]
Post subject:  SVT40 Stripping

Hi Guys,

Bought an SVT40 today (new spec), just wondered if it was strippable?

Want to give it a clean etc, get some of this shellacing off possibly,

any tips greatly appreciated

ta

Mongo

Author:  Gripweed [ Sun Jul 22, 2007 8:48 am ]
Post subject: 

Good source including US ordnance corps manual in .pdf:
http://world.guns.ru/rifle/rfl06-e.htm

Author:  Littlebad [ Sun Jul 22, 2007 10:30 am ]
Post subject: 

I'm not sure if new spec svt's are strippable but if they are this will be the way to do it.

http://www.gunpics.net/

then just select russia and then scroll down to svt there should be a link to dissasembly

Author:  mark_palmer17 [ Sun Jul 29, 2007 11:40 am ]
Post subject: 

cheers guys, I've managed to get the beast apart, got some of that crap off it, just gonna have to try and get it back together :D will let you see it when she's all pretty

Author:  Littlebad [ Sun Jul 29, 2007 13:07 pm ]
Post subject: 

good luck :lol: look forward to it i should hopefully be hiring an svt for peak rail next weekend which will be nice

Author:  mark_palmer17 [ Tue Aug 14, 2007 16:53 pm ]
Post subject: 

as promised.....


Image

Image

Image

Image

Mongo

Author:  Littlebad [ Tue Aug 14, 2007 17:56 pm ]
Post subject: 

thats a nice one

Author:  petty officer [ Tue Aug 14, 2007 23:22 pm ]
Post subject: 

Thats a beauty.

Nice work!

Author:  REME 245 [ Wed Aug 15, 2007 7:18 am ]
Post subject: 

I assume you have striped the wood to get it that light.
Is that the finished colour or are you going to apply something.

I note that you also have the sniper rails which indicates early production.
Does it have the notch in the back of the receiver to allow the scope mount to lock?

Author:  mark_palmer17 [ Wed Aug 15, 2007 21:35 pm ]
Post subject: 

Cheers guys,

Reme, I have stripped it back to the bare wood, cleaned it up, sanded it a bit to smooth it off, and has had 2 coats of linseed oil, was going to leave it at that,

As for the sniper rails, hadn't noticed really, back of the receiver is the 'swingy bit' to press the quick release trigger, and there is a very small notch under that in the metal work? that what you mean?

Mongo

Author:  petty officer [ Wed Aug 15, 2007 21:54 pm ]
Post subject: 

http://rytonarms.co.uk/shop/photos/1172a.jpg

http://rytonarms.co.uk/shop/photos/1172b.jpg

Are other angles of the rails, looks like what you have on yours.

Author:  mark_palmer17 [ Wed Aug 15, 2007 22:06 pm ]
Post subject: 

Yeah looks the same, not sure whats needed on the back end of the receiver, there doesn't seem to be many pics without the scope on?

Why does that push the price up :D

Author:  petty officer [ Wed Aug 15, 2007 22:21 pm ]
Post subject: 

Ahhh.

Well Ryton Arms are selling the railed SVT40's for 280 or so ;)

Nice one :D

Author:  mark_palmer17 [ Wed Aug 15, 2007 23:47 pm ]
Post subject: 

kl kl
80 quid off what mine cost lol

Seems quite surreal to be talking to you in the Russian section Phil, haha

Author:  REME 245 [ Thu Aug 16, 2007 17:23 pm ]
Post subject: 

You can read all about the SVT on this site.

http://www.mosinnagant.net/USSR/svt401.asp

All early production weapons (up till late 42) had the sniper Rails machined, but witout the cut out to allow the scope mount to lock, it is not a true Sniper. I have never seen a picture of this cut out so I cannot comment further.

If anyone has a picture showing this mod to the back of the receiver I would be interested to see it.

Author:  mark_palmer17 [ Thu Aug 16, 2007 19:50 pm ]
Post subject: 

Ahh rubbish, oh well,

still, can't complain for a couple hundred quid, another weapon in the armoury lol

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/